With the development of the times, people's demand for quality of life is getting higher and higher, it is necessary for us to carefully choose a good quality window, a good quality window, not only can sound insulation but also insulation, today we will give you some tips to choose a window.

1、Sliding windows. Push-pull windows are mainly through the external force to push the window slide open and close, according to the number of windows, can be divided into single, double, and multiple to the left and right push-pull different forms. Generally speaking, sliding windows have the advantages of high light, less interior space, easy installation, and use of curtains, but ventilation, sound insulation, dust, and rain performance are relatively poor and also have general shortcomings.

2、Casement windows. As the hinges and hinges are installed on the side of the window, the casement windows can be divided into two types open inwards or outwards according to the opening direction of the window. Flush windows have better sealing, ventilation, lighting, sound insulation, heat preservation, and other properties, and it is easier to wipe and replace the sash. However, inward-opening windows occupy indoor space, outward-opening windows are not easy to install screens, and are easily damaged by wind.

3、Up and down hanging open type. The hinges or hinges of the upper-hung window are fitted above the window, while the lower-hung window is the opposite, both of which can be divided into two modes pushing outwards or pulling the handle inwards. The more prominent advantage of the top and bottom-hung models is that they do not take up much space and have a small opening gap, making them more secure. However, ventilation is poor and requires more attention on a daily basis.

So how do you choose the size of the window?

1、Window height: generally speaking, before the construction process of the house has been the floor height, ventilation, lighting, space, etc. has been done a reasonable design, so the height of the window has basically been determined, if we want to change through the later in the words, is very unrealistic.

The height of windows varies depending on the location, usually higher in schools and other places than in homes and offices. Some windows are not strong enough to be protected. But for the use of glass curtain walls, is as a whole floor spacing to calculate, so its height is generally greater than the height of ordinary windows.

2、Window width: Some buildings have a special design because of the need for modeling, and therefore use a window structure, if this design is used, special attention needs to be paid to the middle of each room to push and slide the problem. At the same time, attention should also be paid to the lack of light and glare brought about by this structure, such structures are usually not suitable for exhibition and display work.

3、General building, common window size specifications are 1.5x0.9m, windows with floor interface distance of 2.4m. If the window height is 0.8m, it must be reinforced. If windows are used, they need to be soundproofed and protected from moisture and dust. Otherwise, they are exposed to moisture, dust, and other harmful substances.

If you can put some plants and flowers on the windowsill, it can be decorative and cheerful.